Free spoon carving template generator – prints on A4 or Letter.
Wok spatula carving template
A wok spatula with a wide, flat blade that's angled down from the handle, so it lies flat against the curved side of a wok and keeps your hand clear of the heat.
The “Wok Turner” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
250 mm (9.8 in)
Blade length × width
85 × 58 mm (3.3 × 2.3 in)
Neck width
16 mm (0.6 in)
Handle width × thickness
20 × 10 mm (0.8 × 0.4 in)
Crank
12° down, S-curved handle
Hanging hole
⌀ 8 mm (0.3 in)
Minimum blank (L × W × T)
256 × 64 × 35.7 mm (10.1 × 2.5 × 1.4 in), including a 3 mm saw margin
It fits on A4 at full size. On US Letter the designer shortens it to 237 mm (9.3 in), the longest that fits. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
The downward angle is easiest to carve from a slightly bent branch. From a straight board, keep the angle small. The hanging hole lets it hang by the stove.
Cut out the top view and trace it on the blank with the grain running along the tool, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the thickness and angle, and carve away everything outside the lines. Read more in How it works.
