Free spoon carving template generator – prints on A4 or Letter.
Kasha porridge spoon carving template
A porridge spoon with a big, deep, round bowl and a short handle, named after the buckwheat porridge (kasha) it's made for. A strong crank lifts the bowl so it scoops cleanly from a deep bowl.
The “Kasha Spoon” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
195 mm (7.7 in)
Bowl length × width
72 × 60 mm (2.8 × 2.4 in)
Bowl depth
24 mm (0.9 in)
Bowl capacity
≈ 26 ml (5.4 tsp)
Neck width
12 mm (0.5 in)
Handle width × thickness
16 × 12 mm (0.6 × 0.5 in)
Crank
18° up
Minimum blank (L × W × T)
201 × 66 × 62.7 mm (7.9 × 2.6 × 2.5 in), including a 3 mm saw margin
It fits at full size on both A4 and US Letter. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
The deep bowl needs a thick blank, so it's a good shape for a curved branch or a crook, where the grain follows the crank. A hook knife makes hollowing a deep bowl like this much easier.
Cut out the top view and trace it on the blank with the grain running along the spoon, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the depth and crank, and carve away everything outside the lines. Read more in How it works.
