Free spoon carving template generator – prints on A4 or Letter.
Faceted spoon carving template
An eating spoon with a faceted, knife-finished handle: flat planes instead of round curves, as you'd leave them straight from a sharp knife. The template marks the facet lines.
The “Whittler's Facets” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
185 mm (7.3 in)
Bowl length × width
60 × 44 mm (2.4 × 1.7 in)
Bowl depth
14 mm (0.6 in)
Bowl capacity
≈ 6.7 ml (1.4 tsp)
Neck width
11 mm (0.4 in)
Handle width × thickness
18 × 11 mm (0.7 × 0.4 in)
Crank
12° up
Minimum blank (L × W × T)
191 × 50 × 39.9 mm (7.5 × 2 × 1.6 in), including a 3 mm saw margin
It fits at full size on both A4 and US Letter. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
Facets show every knife cut, so it's a good exercise in clean, confident strokes. Keep your knife sharp and make each facet in one long cut, without sanding afterwards.
Cut out the top view and trace it on the blank with the grain running along the spoon, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the depth and crank, and carve away everything outside the lines. Read more in How it works.
