Free spoon carving template generator – prints on A4 or Letter.
Mustard spoon carving template
A tiny condiment spoon for mustard, salt, honey or jam. The deep little bowl sits at a steep angle to the handle, so it reaches into a small jar and stands upright in it.
The “Mustard Dab” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
125 mm (4.9 in)
Bowl length × width
40 × 30 mm (1.6 × 1.2 in)
Bowl depth
16 mm (0.6 in)
Bowl capacity
≈ 3.5 ml (0.7 tsp)
Neck width
6 mm (0.2 in)
Handle width × thickness
10 × 8 mm (0.4 × 0.3 in)
Crank
28° up, S-curved handle
Minimum blank (L × W × T)
131 × 36.1 × 45.7 mm (5.2 × 1.4 × 1.8 in), including a 3 mm saw margin
It fits at full size on both A4 and US Letter. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
Because it's so small, it's a great way to use up offcuts and a good exercise in carving a steep crank. Look for a small crook or a piece where the grain curves with the bend.
Cut out the top view and trace it on the blank with the grain running along the spoon, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the depth and crank, and carve away everything outside the lines. Read more in How it works.
