Free spoon carving template generator – prints on A4 or Letter.
Wooden spatula carving template
A flat cooking spatula with a wide, thin blade and a straight handle, for turning pancakes, eggs and fish and for stirring in a pan. A hanging hole lets it hang by the stove.
The “Flat Flipper” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
240 mm (9.4 in)
Blade length × width
85 × 56 mm (3.3 × 2.2 in)
Neck width
22 mm (0.9 in)
Handle width × thickness
24 × 9 mm (0.9 × 0.4 in)
Crank
none: flat
Hanging hole
⌀ 8 mm (0.3 in)
Minimum blank (L × W × T)
246 × 62 × 9.1 mm (9.7 × 2.4 × 0.4 in), including a 3 mm saw margin
It fits on A4 at full size. On US Letter the designer shortens it to 237 mm (9.3 in), the longest that fits. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
A spatula is one of the easiest kitchen tools to carve, as there's no bowl to hollow: it can be made from a straight board. Taper the blade to a thin, even edge so it slides under food.
Cut out the top view and trace it on the blank with the grain running along the tool, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the thickness and angle, and carve away everything outside the lines. Read more in How it works.
