Free spoon carving template generator – prints on A4 or Letter.
Pot scraper carving template
An asymmetric spatula with one straight edge and one angled corner, for scraping the bottom and corners of a pot or pan. This version is for right-handed cooks.
The “Corner Scraper” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
230 mm (9.1 in)
Blade length × width
80 × 52 mm (3.1 × 2 in)
Neck width
18 mm (0.7 in)
Handle width × thickness
22 × 10 mm (0.9 × 0.4 in)
Crank
none: flat
Hand
right-handed
Minimum blank (L × W × T)
236 × 66.8 × 10.2 mm (9.3 × 2.6 × 0.4 in), including a 3 mm saw margin
It fits at full size on both A4 and US Letter. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
Stir with the straight edge and scrape with the corner. Left-handed? Open it in the designer and switch the symmetry to left-handed, and the template mirrors.
Cut out the top view and trace it on the blank with the grain running along the tool, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the thickness and angle, and carve away everything outside the lines. Read more in How it works.
