Free spoon carving template generator – prints on A4 or Letter.
Measuring teaspoon carving template
A wooden measuring spoon that holds about one teaspoon (5 ml). The round, deep bowl is sized for it, and the template shows the bowl capacity, so you can see what your version will hold.
The “Teaspoon Measure” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
150 mm (5.9 in)
Bowl length × width
44 × 34 mm (1.7 × 1.3 in)
Bowl depth
14 mm (0.6 in)
Bowl capacity
≈ 5.1 ml (1 tsp)
Neck width
8 mm (0.3 in)
Handle width × thickness
14 × 9 mm (0.6 × 0.4 in)
Crank
10° up
Minimum blank (L × W × T)
156 × 40.1 × 31.8 mm (6.1 × 1.6 × 1.3 in), including a 3 mm saw margin
It fits at full size on both A4 and US Letter. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
The capacity depends on the wall thickness you leave, so carve close to the dashed hollow line and check it with water against a real measuring spoon. Pair it with the tablespoon measure.
Cut out the top view and trace it on the blank with the grain running along the spoon, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the depth and crank, and carve away everything outside the lines. Read more in How it works.
