Free spoon carving template generator – prints on A4 or Letter.
Measuring tablespoon carving template
A wooden measuring spoon that holds about one tablespoon (15 ml), with a round, deep bowl and a sturdy handle. The bowl capacity is printed on the template.
The “Tablespoon Measure” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
175 mm (6.9 in)
Bowl length × width
60 × 48 mm (2.4 × 1.9 in)
Bowl depth
19 mm (0.7 in)
Bowl capacity
≈ 15 ml (2.9 tsp)
Neck width
10 mm (0.4 in)
Handle width × thickness
16 × 10 mm (0.6 × 0.4 in)
Crank
12° up
Minimum blank (L × W × T)
181 × 54 × 42.2 mm (7.1 × 2.1 × 1.7 in), including a 3 mm saw margin
It fits at full size on both A4 and US Letter. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
Hollow to the dashed line on the template and check the volume with water. If it holds too little, take a bit more from the bowl; carved together with the teaspoon measure, it makes a nice set for the kitchen.
Cut out the top view and trace it on the blank with the grain running along the spoon, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the depth and crank, and carve away everything outside the lines. Read more in How it works.
