Free spoon carving template generator – prints on A4 or Letter.
Coffee scoop carving template
A short, chunky scoop with a deep, round bowl for ground coffee, tea leaves, flour or sugar. The thick handle gives a firm grip and keeps it from falling into the jar.
The “Coffee Scoop” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
130 mm (5.1 in)
Bowl length × width
46 × 44 mm (1.8 × 1.7 in)
Bowl depth
22 mm (0.9 in)
Bowl capacity
≈ 11 ml (2.3 tsp)
Neck width
14 mm (0.6 in)
Handle width × thickness
20 × 12 mm (0.8 × 0.5 in)
Crank
14° up
Minimum blank (L × W × T)
136 × 50.1 × 41 mm (5.4 × 2 × 1.6 in), including a 3 mm saw margin
It fits at full size on both A4 and US Letter. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
Carve the bowl first while the blank is still easy to hold, then shape the short handle. A little more depth gives a little more capacity: the template shows the bowl's volume.
Cut out the top view and trace it on the blank with the grain running along the spoon, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the depth and crank, and carve away everything outside the lines. Read more in How it works.
