Free spoon carving template generator – prints on A4 or Letter.
Baby spoon carving template
A feeding spoon for babies and toddlers: a small, shallow bowl with a blunt tip that's gentle on the mouth, on a long, slender handle for the parent who feeds.
The “Baby Feeder” template on A4, at full size: top view, side view, grain direction and a scale check to measure after printing.
Open it in the designer to change the size or shape, switch to inches or US Letter, and print it or save it as a PDF. The downloaded SVG opens again in the designer with Open.
Measurements
Total length
150 mm (5.9 in)
Bowl length × width
40 × 30 mm (1.6 × 1.2 in)
Bowl depth
7 mm (0.3 in)
Bowl capacity
≈ 1.5 ml (0.3 tsp)
Neck width
7 mm (0.3 in)
Handle width × thickness
12 × 7 mm (0.5 × 0.3 in)
Crank
6° up
Minimum blank (L × W × T)
156 × 36 × 18.2 mm (6.1 × 1.4 × 0.7 in), including a 3 mm saw margin
It fits at full size on both A4 and US Letter. Print at 100% scale with no margins, then check the scale bar on the sheet with a ruler.
Carving tips
Make the bowl shallow and thin-walled so food slides off easily, and round over every edge. A close-grained wood such as maple, beech or cherry finishes smoothly and holds up to daily washing.
Cut out the top view and trace it on the blank with the grain running along the spoon, as the grain arrow shows. Saw the outline, then draw the side view on the side of the blank for the depth and crank, and carve away everything outside the lines. Read more in How it works.
